Rack Mounting Symphony I/O

Rack ears are included in the Accessories box for mounting Symphony I/O in a standard 19” equipment rack. 

1. Orient one rack ear to line up the ear's three holes with three holes found on the side of the chassis immediately behind the front panel extrusion.
2. Insert 3 screws (included) and finger tighten.
3. Connect the second rack ear to the other side of the chassis.
4. On each side, line up the top and bottom of the rack ear with the top and bottom of the front panel extrusion and tighten the screws with a Phillips screwdriver. Don't overtighten the screws.
5. Remove the screw-on feet by turning them counter-clockwise by hand or with a Philips screwdriver.