![Apogee Logo White.png]](https://knowledge.apogeedigital.com/hs-fs/hubfs/Apogee%20Logo%20White.png?height=40&name=Apogee%20Logo%20White.png){kind=small}
Symphony I/O Mk 2
Getting Started Troubleshooting FAQ's
User Guide
Getting Started
- Installing Control 2 Native for Symphony I/O MkII Thunderbolt
- Setting up Symphony Mk II with Ginger Audio's GroundControl Sphere for Immersive Audio
- Direct monitoring with Symphony MK II Thunderbolt in Symphony Control
- How To Set Up Symphony I/O Mk 2 in Standalone Mode
- Setting up and configuring Symphony I/O MkII with Pro Tools HD
- How to set the Symphony I/O MkII for Auto-Power On
- Getting Started Step-by-step with Symphony I/O Mk II Dante
- Symphony I/O Mk2 Dante Clock Source & Sample Rate Configuration
- Symphony I/O Mk2 Dante + Pro Tools HD Routing
- Symphony I/O Mk2 Dante Routing
- Updating Symphony MkII firmware via Dante
Compatibility
- Can Symphony Mk II be used with Windows OS?
- KEXT vs DEXT
- What I/O modules are supported in Symphony I/O MkII and are there restrictions?
- 16x16SE Module Card Compatibility Guide for Symphony I/O MkII
- Symphony I/O MkII System Requirements & Compatibility
- Symphony I/O MkII v3.5 Release for 10.15 Catalina
Troubleshooting
- Symphony I/O MkII not being seen with Sequoia
- When two Symphony I/O Mkll’s are daisy chained, channel numbers may be wrong in Control 2
- Symphony I/O MkII Multi-UNIT tips, tricks and troubleshooting
- Symphony I/O MkII / Control 2 trouble shooting
- Symphony I/O MkII Thunderbolt is not recognized in Symphony Control (macOS Big Sur, Monterey, Ventura)
- Symphony I/O Mk II Dante Troubleshooting
- Symphony MK II Pro Tools HD cannot playback core audio outside of Pro Tools and shows 00.00 on the screen
- Apogee Control is not working with my Pro Tools HD connected Symphony
- Not getting audio input/output in DAW with Symphony I/O MkII
- Clocking errors reported or clicks & pops heard with Symphony I/O Mk 2 Dante
FAQ's
- Are my Apogee's outputs DC Coupled for Control Voltage (CV) use?
- Symphony I/O: Does the 2x6 I/O Module have Mic Preamps?
- How do I apply delay compensation and eq to my Symphony I/O MkII outputs for calibration and certification?
- Symphony I/O MkII Pinout Configurations
- Symphony I/O Mk II – Thunderbolt 2 to Thunderbolt 3 Upgrade
- Is the Connect8 I/O module card for Symphony I/O MkII also compatible with the Mk1 original Symphony?
- Switch Between Optical and AES
- How to use the Talkback function in Apogee Control for Element, Ensemble Thunderbolt, and Symphony I/O MkII
- How do I get a Symphony I/O MkII Dante System & how does it work?
- What's the best way to connect Symphony I/O Mk II balanced outputs to an unbalanced input?
- How to use Low Latency Mixers with two Symphony I/O MKII Thunderbolt units, Multi-Unit Mode?
- SoundGrid FAQ for Symphony I/O Mk II when equipped with Waves SoundGrid option card
- How do I tell if a Symphony I/O module is MK II (or SE) or MK I?
- How Do I Reset the Symphony I/O MkII?
- How to disable the Swipe Gesture on Symphony I/O MkII Touchscreen
- How to Adjust Display Brightness and Set Display Dim Timer on Symphony I/O MkII
- How do I find the firmware versions for my Symphony I/O MkII?
- What are the dimensions/measurements of the Symphony I/O MkII?
- Do I need to install Apogee software to use Symphony I/O MkII with Pro Tools HD?
- What is the USB on the back of the Symphony I/O MkII HD Option card for?